High quality smoke alarm HC-84/HC-85 and fire protection smoke detector for smart home

(0 reviews)

Sold by:
Inhouse product

Price:
$5.00 /Pc

Quantity:
(19600 available)

Total Price:
Share:

High quality smoke alarm ST81 and fire protection smoke detector for smart home

INSTALLTION:

      1. Hold base firmly and push the hinge in then turn anti-clockwise, unload the base. If you don’t have enough power to separate the base, you can do as diagram4 shows.

2. Hold the smoke alarm base against the ceiling (or wall) and make a mark at the center of each of the mounting slots with a pencil.

3.  Place the unit where it won’t get covered with dust when

You drill the mounting holes.

4. Using a 6.5mm drill bit, drill a hole through each pencil mark into 35mm depth.

5. Insert the plastic screw anchors into the holes and tap them gently with a hammer. Tighten the 3*30 screws into the screw anchors, then loosen them two turns. Refer diagram 5

6. Slide the smoke alarm base up to the screw heads to match with the narrow ends of the mounting slots, then tighten the screws completely.

7. If the battery is needed, unscrew the screws fixing the battery cover, and insert the 9v battery into the box, then close the battery cover and tighten the screws, Refer Diagram 6

Close the bottom cover and the alarm body, and then finish your installation.  

There have been no reviews for this product yet.